Viewsonic PJD7400W Manuel D’Utilisation

Sets the language for the On-Screen Display (OSD) menus. See 

"Using the menus" on page 24

 for details.

The projector can be installed on a ceiling or behind a screen, or 
with one or more mirrors. See 

"Choosing a location" on page 12

 

for details.

Allows the projector to turn off automatically if no input signal 
is detected after a set period of time. See 

"Setting Auto Power 

Off" on page 55

 for details.

Sets the image blank time when the Blank feature is activated, 
once elapsed the image will return to the screen. See 

"Hiding the 

image" on page 37

 for details.

Disables or enables all panel key functions except 

POWER 

on the projector and keys on the remote control. See 

"Locking 

control keys" on page 37

 for details.

Allows you to select which logo screen will be displayed during 
projector start-up.

Captures and stores the projected picture as Screen Capture. 
See 

"Creating your own startup screen" on page 39

 for details.

Selecting On displays the current information on the screen 
when the projector is detecting or searching for a signal.

See 

"Controlling the projector through a LAN environment" on 

page 40

 for details.

See 

"Using the projector in standby mode" on page 44

 for 

details.

A mode for operation in high altitude areas. See 

"Operating in a 

high altitude environment" on page 38

 for details.

Enables or disables the DCR (Dynamic Contrast Ratio) function. 
Selecting On enables the function and the projector will 
automatically switch the lamp mode between normal and 
economic modes according to the input image detected.

50