Manualsbrain.com
  1. Manuels
  2. Marques
  3. Benq
  4. PE6800
  5. Manuel D’Utilisation

Benq PE6800 Manuel D’Utilisation

Télécharger
Page de 33
30 
Additional Information  
Indicators
There are three indicators which show the status of the projector. Check the following for information about the 
indicator lights. If there is anything wrong, turn the projector off and contact your dealer. 
When the projector is in a normal state, ... 
When the projector is in an abnormal state, ... 
POWER
LAMP
TEMP
STATE
REMARK
Orange
Off
Off
Standby mode.
Flashing 
Green
Lamp standby mode.
Cannot turn the projector off.
Green
Power on.
Flashing 
Orange
Lamp is cooling down.
Cannot turn the projector on.
POWER
LAMP
TEMP
STATE
REMARK
Orange
Off
Red
The internal temperature is too 
high.
•
The intake ventilation or the 
exhaust ventilation is blocked.
•
The  projector  may  be  in  a 
poorly ventilated location.
•
The ambient temperature may 
be too high.
Solution:
•
Make that the ventilation 
holes are not blocked.
•
Relocate the projector.
•
Stop using the projector until 
the ambient temperature falls 
within the specified range. 
The maximum operating 
temperature is specified as 
35°C / 95°F.
Red
Off
The projection circuit is working , 
or the lamp is abnormal.
Solution:
•
Restart the projector.
If this operation is repeated several 
times and the lamp indicator remains in 
red, replace the lamp and contact your 
dealer for assitance.
Green
Flashing 
Red
Off
Almost time to to replace the lamp. 
The lamp has been used for 1000 
hours. (The power is on.)
Solution:
•
Install a new lamp.
 Orange
Almost time to to replace the lamp. 
The lamp has been used for 1000 
hours. (The power is off.)
Red
Time to to replace the lamp. The 
lamp has been used for 1500 hours
Flashing 
Red
Flashing 
Red
The cooling system has a problem.
Contact your dealer.