Benq MP727 Manuel D’Utilisation

Operation

52

(default setting/
value)

(default setting/value)

 (Off)

Corrects the projected picture’s color when the projection surface is 
not white. See 

 for details.

(Auto)

There are four options to set the image's aspect ratio depending on 
your input signal source. See 

for details.

(0)

Corrects any keystoning of the image. See 

 for details.

(0)

Displays the position adjustment page. To move the projected image, 
use the directional arrow keys. The values shown on the lower 
position of the page change with every key press you made until they 
reach their maximum or minimum.

(depends on the 
selected input 
signal)

Adjusts the clock phase to reduce image 
distortion.

(depending on 
the selected 
signal)

Adjusts the horizontal width of the image.

(1.0X)

Magnifies or reduces the projected image. See 

 for details.

(PC source: 
Dynamic;
Video source: 
Standard)

Pre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type. See 

 for details.

Selects a picture mode that most suits your need for the image quality 
and further fine-tune the image based on the selections listed on the 
same page below. See 

for details.

Adjusts the brightness of the image. See 

 for details.

Adjusts the degree of difference between dark and light in the image. 
See 

 for details.

(0)

Adjusts the color saturation level -- the amount of each color in a 
video image. See 

 for details.