Manualsbrain.com
  1. Manuels
  2. Marques
  3. Benq
  4. MW512
  5. Manuel D’Utilisation

Benq MW512 Manuel D’Utilisation

Télécharger
Page de 70
Operation
37
For example, if you select Red and set its value at 0, only the saturation of pure red will 
be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less 
saturated colors; a setting of “0” removes that color from the image entirely. If the 
saturation is too high, that color will be overpowering and unrealistic.
6.
Press 
 to highlight Gain and adjust its values to your preference by pressing 
/
. 
The contrast level of the primary color you select will be affected. Every adjustment 
made will reflect to the image immediately. 
7.
Repeat steps 3 to 6 for other color adjustments.
8.
Make sure you have made all of the desired adjustments.
9.
Press Menu/Exit to exit and save the settings.
Creating your own startup screen
In addition to selecting the projector preset startup screen from among BenQ logo, Black or 
Blue screen, you can make your own startup screen that is an image projected from your 
computer or video source.
1.
Project the image you want to use as your 
startup screen from either a computer or 
video source.
2.
Press CAPTURE on the remote control or go 
to the SYSTEM SETUP: Basic > MyScreen 
menu, press Mode/Enter.
3.
A confirmation message displays. Press 
CAPTURE or Mode/Enter again.
4.
The message 'Screen Capturing...' displays while the projector is processing the image. 
Please wait.
5.
If the action is successful, you see the message 'Captured Succeeded' on the screen. The 
captured image is saved as MyScreen.
6.
To view the captured image displayed as the startup screen, set MyScreen in the 
SYSTEM SETUP: Basic > Splash Screen menu and restart the projector.
In the unlikely event, the capturing action failed. If so, change your target image.