Benq MX503 Manuel D’Utilisation
Operation
25
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To change the projected picture ratio (no matter what aspect the source is):
1.
Press MENU/EXIT and then press
/
until the DISPLAY menu is highlighted.
2.
Press
to highlight Aspect Ratio.
3.
Press / to select an aspect ratio to suit the format of the video signal and your
display requirements.
display requirements.
About the aspect ratio
•
In the pictures below, the black portions are inactive areas and the white portions are active areas.
•
OSD menus can be displayed on those unused black areas.
1.
Auto
: Scales an image proportionally to fit
the projector's native resolution in its
horizontal or vertical width. This is suitable
for the incoming image which is neither in
4:3 nor 16:9 and you want to make most
use of the screen without altering the
image's aspect ratio.
horizontal or vertical width. This is suitable
for the incoming image which is neither in
4:3 nor 16:9 and you want to make most
use of the screen without altering the
image's aspect ratio.
4.
16:9: Scales an image so that it is
displayed in the center of the
screen with a 16:9 aspect ratio.
This is most suitable for images
which are already in a 16:9 aspect,
like high definition TV, as it
displays them without aspect
alteration.
displayed in the center of the
screen with a 16:9 aspect ratio.
This is most suitable for images
which are already in a 16:9 aspect,
like high definition TV, as it
displays them without aspect
alteration.
2.
Real
: The image is projected as its original
resolution, and resized to fit within the
display area. For input signals with lower
resolutions, the projected image will
display smaller than if resized to full screen.
You could adjust the zoom setting or move
the projector towards the screen to
increase the image size if necessary. You
may also need to refocus the projector
after making these adjustments.
display area. For input signals with lower
resolutions, the projected image will
display smaller than if resized to full screen.
You could adjust the zoom setting or move
the projector towards the screen to
increase the image size if necessary. You
may also need to refocus the projector
after making these adjustments.
5.
16:10: Scales an image so that it
is displayed in the center of the
screen with a 16:10 aspect ratio.
This is most suitable for images
which are already in a 16:10
aspect, as it displays them without
aspect alteration.
is displayed in the center of the
screen with a 16:10 aspect ratio.
This is most suitable for images
which are already in a 16:10
aspect, as it displays them without
aspect alteration.
15:9 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture