WatchGuard Technologies SOHO 6 Manuel D’Utilisation

User Guide

91

Set Up Multiple SOHO-SOHO VPN Tunnels

steps. Make sure that the Phase 1 settings on this device are the 
same as on the peer device. 

6

Select the type of negotiation for Phase 1. The two Mode Types 
are Main and Aggressive. If your external IP address is 
dynamic, you must use Aggressive Mode, otherwise you may 
use either option.

7

Enter the local and remote ID types. These must match the 
settings used on the remote gateway.

 - If you are using Main Mode, the Local and Remote ID 

Type must be an IP Address. 

 - If you are using Aggressive Mode, the Remote ID Type 

may be either IP Address or Domain Name. If your 
external IP address is fixed, the Local ID Type must be IP 
address, otherwise your Local ID Type may be either 
Domain Name or IP Address.

8

In  the  Local ID and Remote ID box, specify the name of the 
local or remote network. The default is LocalID and RemoteID. 
In the Type box, specify IP Address or Domain Name.

If you are in Main Mode, both the Local and Remote IDs must be IP 

Address. If you are in Aggressive Mode and have a static IP address, the 

Local ID must be IP Address and the Remote ID can be either IP Address 

or Domain Name. If you are in Aggressive Mode and have a dynamic IP 

address, the Local ID must be Domain Name and the Remote ID can be 

either IP Address or Domain Name.

9

In  the  Authentication Algorithm drop list, specify the 
authentication: MD5-HMAC (128-bit authentication) or SHA1-
HMCA (160-bit authentication).

10 In the Encryption Algorithm drop list, specify the type of 

encryption: DES-CBC or 3DES-CBC.

11 Enter how many kilobytes until negotiation expiration.

12 Enter how many hours until negotiation expiration.