WatchGuard Technologies SOHO 6 Manuel D’Utilisation
User Guide
99
Configure the SOHO 6 WebBlocker
3
Select Enable WebBlocking.
4
Enter the full access password.
The full access password allows a user a to bypasses otherwise blocked
sites.
5
Enter the inactivity timeout in minutes.
For example, setting the inactivity timeout at 15 minutes ensures that
unattended Web browsers are disconnected after sitting idle for 15
minutes.
6
If you intend to use WebBlocker groups and users, select
Require Web users to authenticate.
Require Web users to authenticate.
7
Click Submit to register your changes.
Create WebBlocker Groups and Users
Follow these instructions to create WebBlocker Groups.
1
With your Web browser, go to the SOHO 6 Configuration
Settings page using the Trusted IP address of the SOHO 6.
Settings page using the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
WebBlocker => Groups.
WebBlocker => Groups.