RAD Data comm BLW-04EX Manuel D’Utilisation

16

15

BLW-04EX

To  acces s  the  Int ernet  through  t he  B LW-04EX,  you  must  configure  the

network settings of the computers on your LAN to use the same IP subnet

as the BLW-04EX. The default network settings for the BLW-04EX are:

These settings may be changed to suit your network requirements, but you

m ust  first  configure  at  l east  one  computer as  descri bed  i n  Chapter  5  t o

access  the  BLW- 0 4 E X ’s  web  configurat ion  interface.  (See  Chapter  4  for

information on configuring the BLW-04EX.) 

If you have not previously configured TCP/IP for your computer, refer to

“Configuring Client TCP/IP” on page 5-1. 

All PCs connected to the BLW-04EX must be in the same IP subnet as the

B LW-0 4EX.  The  defaul t  IP  add ress   of  the  BLW-04EX  is   192.1 68.1. 1

(where x means 2–254) and the subnet mask is 255.255.255.0. You can set

the IP address for client PCs either by automatically obtaining an IP address

from  t he  B LW- 0 4 E X ’s  DHC P  service  or  by  manual  configurati on.  See

“Setting Up TCP/IP to Work with the BLW-04EX” on page 5-5.