RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation
Chapter 5 Setup Menu
FCD-IPM Installation and Operation Manual
5-36
Interface Parameters Menu
Table 5-17. T1 Setup Parameters (Cont.)
Parameters Possible
Values Description
Time Slots
Mapping
Data link1
FIX SUB Voice
FIX SUB Data
FIX Voice (1, 2, 3, 4)
I/O1 Voice (1, 2, 3, 4)
I/O2 Voice (1, 2, 3, 4)
I/O1 SUB Data
I/O2 SUB Data
I/O1 SUB Voice
I/O2 SUB Voice
I/O1 Channel
I/O2 Channel
Configures the routing and the type of individual timeslots for
shows the type of timeslots entering the
multiplexer (MUX) (for FCD-IPM with a T1 sublink)
For data from router/bridge
For voice from sublink
For data from sublink
For analog voice port 1, 2, 3, 4
For analog voice port 1, 2, 3, 4
For analog voice port 1, 2, 3, 4
For data from I/O1 sublink
For data from I/O2 sublink
For voice from I/O1 sublink
For voice from I/O2 sublink
For I/O1 n x 64/56 data port
For I/O2 n x 64/56 data port
Note: For a multiplier of 64 kbps all timeslots can be
For data from router/bridge
For voice from sublink
For data from sublink
For analog voice port 1, 2, 3, 4
For analog voice port 1, 2, 3, 4
For analog voice port 1, 2, 3, 4
For data from I/O1 sublink
For data from I/O2 sublink
For voice from I/O1 sublink
For voice from I/O2 sublink
For I/O1 n x 64/56 data port
For I/O2 n x 64/56 data port
Note: For a multiplier of 64 kbps all timeslots can be
configured to DATA. But, for a multiplier of 56 kbps, a
maximum of 16 timeslots can be configured to DATA.
For FCD-IPM with a T1 Sublink, this limitation does not exist
for timeslots configured to the VOICE or DATA SUB type.
for timeslots configured to the VOICE or DATA SUB type.