RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation
FCD-IPM Installation and Operation Manual
Chapter 5 Setup Menu
Interface Parameters Menu
5-43
Card options are:
• Sub – depending on your hardware installation options are:
• Sub – depending on your hardware installation options are:
Fix Sub – parameters for T1 are shown as those in
I/O1 Sub
I/O2 Sub
• Voice
Fix Voice
I/O1Voice
I/O2 Voice.
Voice Parameters
FCD-IPM has optional voice capabilities.
FXS Voice Interface
VOICE PARAMETERS: (Device name - FCD-IPM , I/O1 VOICE)
-----------------
1. TX/RX gains
2. Coding law : [µ LAW]
3. On/off hook from the T1 on : [A bit]
4. On/off hook to the T1 on : [A bit]
5. Default ABCD to the T1 : [0001]
6. Polarity : [Disabled]
ESC - Return to previous menu
Choose one of the above:
Figure 5-51. FXS Voice Interface
RX/TX Gains
Select this parameter to specify the nominal input level of the receive and transmit
paths for each voice port. The input level range is –10 to +5 dBm.
Coding Law
Select this parameter to specify the compounding law to be used by the voice
channels. The values are:
channels. The values are:
µ Law Coding for T1 links.