RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation

FCD-IPM Installation and Operation Manual 

Chapter 5  Setup Menu 

 

Interface Parameters Menu 

5-65 

 E1 ALARMS FILTER (Device name – FCD-IPM) 

 ----------------------- 

 1. Frame slip 

 

  : [Unmasked] 

 2. BPV error   

 

  : [Unmasked] 

 3. Excessive BPV 

 

  : [Unmasked] 

 4. CRC-4 error 

 

  : [Unmasked] 

 5. Excessive error ratio 

  : [Unmasked] 

 6. Signal loss 

 

  : [Unmasked] 

 7. Remote sync loss   

  : [Unmasked] 

 8. Local sync loss 

 

  : [Unmasked] 

 9. Local multi frame alarm    : [Unmasked] 

 10. Remote multi frame alarm : [Unmasked] 

 11. AIS red alarm 

 

  : [Masked] 

 12. AIS 

 

  : [Unmasked] 

 
 ESC – Return to previous menu 

Advanced Setup 
Select this option to configure the management via a dedicated time slot. 
This feature enables management of FCD-IPM by configuring a specific time slot, 
of type MNGMNT. A new E1 management link is then created and assigned with a 
unique host IP address, which is different from the LAN/WAN IP addresses defined 
in other screens. The management host IP address is used for SNMP, Telnet, TFTP 

software download or ping. 
The management link must be of the IP router type, and is available to IP traffic 
only. 

Select this parameter to enable management via the dedicated time slot. By 
default, this is disabled. 

Select this parameter to set the specific time slot number for management. 

Select this parameter to set a unique IP address. 

FCD-IPM with ISDN connects your Ethernet LAN to the Internet/Intranet at a rate 
of 64 or 128 Kbps. FCD-IPM with an ISDN interface was designed to reduce WAN