RAD Data comm Modular Access Device with Integrated Router Manuel D’Utilisation

FCD-IPM Installation and Operation Manual 

Appendix C  SNMP Management 

 

SNMP Configuration 

C-5 

The following is the indexing convention of the SNMP configuration: 
•  Lan1    ifindex = 1 
•  Lan2    ifindex = 2 
•  Link1   ifindex = 3 
•  Link2   ifindex = 4 
•  SubE1  ifindex = 5 
•  Voice1 ifindex = 6 
•  Voice2 ifindex = 7 
•  Voice3 ifindex = 8 
•  Voice4 ifindex = 9. 

Other indices are dynamic numbers which indicate higher protocol layers of the 
physical interfaces. 

 

The following indices are used for FCD-IPM with E1 over SHDSL interface:   
•  SHDSL – ifindex = 3  
•  E1 – dynamic. 

 

➤  To access SNMP configuration: 

1.  Enter Security Setup menu. 
2.  Choose Device Access Restrictions. 
3.  Choose SNMP Access Status: Enable/Disable. 

➤  To enable community configuration: 

1.  Enter Security Setup menu. 
2.  Choose Device Access Restrictions. 
3.  Choose either: SNMP Read, Write or Trap Community, depending on what 

you want to configure. 

4.  Configure the community to the same setting as at the NMS station. 
 

➤  To enable trap configuration: 

1.  Enter Advanced Menu.