MicroNet Technology SP5050 Manuel D’Utilisation

5.12 [pppoe]

Display PPPoE related information.

PPPoE device information and configuration
Usage:
pppoe [-print]|[-open]|[-close]
pppoe [-dev on/off][-id username][-pwd password]

-print

Display PPPoE device information.

-dev

Enable(=1) or Disable(=0) device.

-open

Open PPPoE connection.

-close

Disconnect PPPoE connection.

-id

Connection

user

name.

-pwd Connection

password.

-reboot

Reboot after remote host disconnection.

Paremeter Usage:
-print

print PPPoE status.

-dev

Enable PPPoE Dial-up function

-open

Open the connection

-close

Close the connection

-id

Input the User name ID provided by ISP

-pwd

Input the User name password provided by ISP

-reboot

Reboot the PPPoE connection.

5.13 [sysconf] command

This command displays the system information and configuration.

usr/config$ sysconf

System information and configuration
Usage:
Sysconf [-service type] [-plan digits] [-2nddial flag]

[-keypad dtmf] [-ringdet method] [-callalive flag]

[-port s1 s2 s3 s4 ]

[-seizure mode] [-2nddial switch]

[-drule [in_filter str1] [in_drop str2] [in_insert str3]

[out_filter str4] [out_drop str5] [out_insert str6]]

[-askpin f] [-pincode [set1 pin1] [set2 pin2] [set3 pin3] [set4 pin4]]

sysconf -print

-print

Display system overall information and configuration.

-service

Specify gateway service type.
(0: Dial in service,2: HotLine/LineToLine service.)

-ringdet

Specify gateway ring detect method. (0:For 1st hardware

version,

1:For 2st hardware version.

-plan

Number of digits for dial plan. (any positive number.)

-port

Enable/Disable individual port.