Siemens 6500 Series Manuel D’Utilisation

6500 Series Residential Gateway User’s Guide

 

Configuring Advanced Features

 

 

7. 

Double-click the icon. The Gateway will open another Web page for UPnP functions. Now, NAT 
functionality is available. The Gateway will create virtual servers automatically when it detects the 
computer running Internet applications that require this configuration. 

Now you can configure the Gateway for UPnP.  To configure UPnP on the Gateway: 

1. Click 

Configure the Universal Plug and Play Settings link to display the ”UPnP Configuration” 

window: 

 

 

2. 

Select one of the following operating modes to enable or disable UPnP. 

•  Disable UPnP 

Prevents the Gateway from using the UPnP feature to communicate with other devices or your 
operating system. Also may be disabled if your operating system does not support UPnP.  

•  Enable Discovery and Advertisement only (SSDP) 

Sends information about new devices (hardware) detected only. No information concerning 
software applications or services is transmitted.  

•  Enable full Internet Gateway Device (IGD) support 

Allows the Gateway to communicate freely with computers on the network about new devices, 
software applications, and services as needed to ensure they are working with minimal manual 
configuration required.  

3. 

Select one of the following control options. 

•  Enable Access Logging 

Logs UPnP transactions to the system log. 

•  Read Only Mode  

Can read configuration information from a device; cannot modify the device configuration. 

4. Click 

Apply to accept the settings. This displays the UPnP finish window. 

5. Click 

Reboot. 

58