MicroNet Technology SP3367A Manuel D’Utilisation

17 

Before configure the router, you need to know the connection information 

supplied by your ADSL service provider. 

 

Unlike a simple hub or switch, the setup of the ADSL Router consists of 

more than simply plugging everything together. Because the Router acts 

as a DHCP server, you will have to set some values within the Router and 

also configure your networked PCs to accept the IP Addresses the Router 

chooses to assign to them. Generally, there are several different operating 

modes for your applications. Your ISP will tell you which mode is 

necessary for your system. The modes available are router, bridge, 

PPPoE+NAT and PPPoA+NAT. 

 

Please follow the steps instructed below when installing your system for 
the first time via web console: 

1) Shut down the power on everything, including your PCs and ADSL 

Router.