Huawei MC509 Manuel D’Utilisation
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
AT Command Interface Specification
Basic Configuration Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
25
2
Basic Configuration Commands
2.1 E–Echo Command
2.1.1 Syntax
Command
Possible Response(s)
E[<value>]
<CR><LF>OK<CR><LF>
2.1.2 Interface Description
This command sets whether the MT echoes the characters received from the TE.
The dial-up network, especially the automatic processing software automatically sends the
ATE0 command to disable the echo mode, thus shortening the time for the client to parse the
AT command.
ATE0 command to disable the echo mode, thus shortening the time for the client to parse the
AT command.
2.1.3 Parameter Description
<value>:
0: The MT does not echo the characters received from the TE.
1: The MT echoes the characters received from the TE (default value after startup).
In case of using the command without <value>, <value> is set to 1.
After restart, <value> is set to 1.