Huawei MC509 Manuel D’Utilisation
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
AT Command Interface Specification
Call Control Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
82
7.14.2 Interface Description
This command sets the Point to Point Protocol (PPP) user name and password
before data service dial-up. After the dial-up connection is successful, the client can
use the user name and password to establish a PPP connection.
before data service dial-up. After the dial-up connection is successful, the client can
use the user name and password to establish a PPP connection.
7.14.3 Parameter Description
<userid>: Specifies the PPP authentication user name. It is a string with double
quotation marks. The maximum length is 127 characters excluding the double
quotation marks.
quotation marks. The maximum length is 127 characters excluding the double
quotation marks.
<password>: Specifies the PPP authentication password. It is a string with double
quotation marks. The maximum length is 127 characters excluding the double
quotation marks.
quotation marks. The maximum length is 127 characters excluding the double
quotation marks.
7.14.4 Example
AT^PPPCFG="Huawei","Huawei"
OK
7.15 +CTA–Command for Setting operating mode
7.15.1 Syntax
Command
Possible Response(s)
+CTA=<cta>
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>ERROR:<err><CR><LF>
+CTA?
<CR><LF>+CTA:<n><CR><LF>
In case of an MT-related error:
<CR><LF>ERROR:<err><CR><LF>
+CTA=?
<CR><LF>+CTA:(supported <n> list)<CR><LF>
In case of an MT-related error:
<CR><LF>ERROR:<err><CR><LF>
7.15.2 Interface Description
Execution command use to set the time to enter the dormant.
Read command use to read the time to enter the dormant.
Test command use to test the time to enter the dormant.