ADC 500L Manuel D’Utilisation

If you get phone service, all you need is an RJ-11 phone jack to connect your phone. This 
lite-rate modem provides splitterless capability, which allows reception of phone service 
without special splitters or filters; simply connect your phone.

Use the worksheets, provided in 

, to record your configuration 

information. When you begin to configure the modem in 

, the procedures 

refer you to the proper table for the configuration information that you recorded.This section 
lists the information you need to configure system settings and sessions for the modem. Contact 
your service provider for this information.

If using CHAP, the CHAP authentication name for each session.

Session address for Ports 1 through 3 (WAN configuration):

ATM VPI and ATM VCI (specified for each session)

when using fixed IP addresses, IP address specified for each session by the 
service provider

Login Name and Login Password (specified for each session)

For more information about the configuration choices listed above, see 

.

The Megabit Modem 500L is available with a variety of power supplies and power cords. When 
you order your modem, choose one of the following as the last number in the product part 
number (150-2120-7x) for your order to indicate which power option you need:

2 indicates a power supply for International use and does not include a power cord.

3 indicates a power supply for North American use and includes a North American 
power cord.

4 indicates a Universal power supply and includes a European power cord.

5 indicates a Universal power supply and includes a UK/Ireland power cord.