Lucent Technologies 7820-0766-004 Manuel D’Utilisation

Upgrading System Software
Upgrading software

5-2

CellPipe™ 20 Series User’s Guide

Follow the procedure below to upgrade software: 

Extract the loads from eSight to your computer.

Establish an Ethernet connection between the unit and your computer.

Set up IP addresses on the unit and your computer such that you can successfully 
ping the unit.

Under the DOS prompt on your computer, enter the path to the directory 
containing the extracted loads and a file named xupgrade.bat.

To start the upgrade, execute command 

xupgrade <ipaddress of 

unit>

, for example:

C:\> 

There is no need to back up your current configuration. Using the 

xupgrade.bat file for upgrading will retain your current configuration. The 
upgrading process might last as long as 60 seconds.

Then enter the 

restart

 command to reboot the unit.

Lastly enter the 

save

 command to save the new upgrade.

Maintain stable power to the unit while upgrading software. If power fails 

during the upgrading process, contents in the memory could be destroyed and the 
system will hang and no longer function.