EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge Manuel D’Utilisation

 
After configuring Wireless client bridge, user can back-up the configuration 
files. User can upload the latest back-up files and recover the Wireless 
client bridge configuration to the settings specified in the back-up files. 
 

„ 

Just being the same with firmware upgrade procedures. After the prompt 
character NetARM> is displayed, select “S – Save image to file”, and then 
select “6: CONFIG” to back-up the Wireless client bridge configuration as 
the figure shown below. The back-up file will be saved as <CONFIG.IMG> 
file. 
 

 

 

„ 

 
To upload an configuration file to Wireless client bridge, user should select 
“F -- upgrade Flash memory” and then select “6: CONFIG”. While the 
window starts to display “C” character continuously, click Transfer and 
select the preferred <CONFIG.IMG>, then press OK to start transferring file 
to Wireless client bridge.  
 

 

 

Note: Remember to press “R” to reboot the system after you upload the 

configuration file to the Wireless client bridge