IBM 09-0572-000 Manuel D’Utilisation

5 From the Select Network Component Type dialog box, 

double-click Adapter.

6 From the Select Network Adapters dialog box, click 

Have Disk.

7 Insert the 

TokenDisk diskette in the floppy drive.

8 In the Copy Manufacturer’s Files From selection box, type 

the following:

9 Click OK.

10 In the Models selection box, highlight the correct adapter 

(either ISA or EISA).

■

Choose 3Com TokenLink III ISA (3C619B, 3C619C) in EISA 
mode if you installed the adapter in an EISA slot and used 
the EISA configuration utility to configure the adapter.

■

Choose 3Com Token Link III ISA (3C619B, 3C619C) if you 
installed the adapter in an ISA slot. You may also make 
this selection if the adapter is in an EISA slot with 
AutoSwitch disabled.

TokenLink III ISA Adapter appears in the selection box.

11 Click OK.

12 From the Network dialog box, click OK.

13 In the Resources screen, click OK to accept the I/O base 

address.

14 Remove the diskette.

15 Click Yes to restart your PC to activate the driver.

This completes the installation of the 3Com NDIS 3.0 driver 
for Windows 95.