IBM 09-0572-000 Manuel D’Utilisation

C

HAPTER

 7: T

ROUBLESHOOTING

If you want to change the test parameters, follow these steps:

1 Choose the <Test Setup> command button in the Run Tests 

dialog box shown in Figure 7-4.

The Test Setup dialog box appears, as shown in Figure 7-5.

Figure 7-5   Test Setup Dialog Box

2 Press [Tab] to move from field to field and highlight any 

field within the Test Setup dialog box.

Within the Group Select area, use the arrow keys to highlight 
Group 1 or Group 2. Use the <Enable Group> or <Disable 
Group> command buttons to enable or disable a group of tests.

For a description of these tests, refer to the on-line help in 
the diagnostic program. 

3 When you are satisfied with the new test setup, highlight 

the <OK> command button and press [Enter].

4 To run the tests, choose Run Tests from the Test menu and 

select the <Start> button.

↑↓