Alcatel Carrier Internetworking Solutions 1642 Manuel D’Utilisation

Beyond mapping business and industrial Ethernet

flows onto SDH network resources through standardized
mechanisms such as GFP/LAPS, VCAT and LCAS (as
specified in ITU G.7041, ITU G.7042 and ITU G.707), the
ISA-ES1 series cards introduce wire-speed classification,
policing and scheduling capabilities on a carrier-class
Ethernet switching blade.

Per-customer traffic flow management with low band-

width granularity, traffic segregation and per-flow QoS
mechanisms are supported to enable service-oriented
Ethernet networking. Two different blade options are
available for the ISA-ES1 to meet the required capacity
and features, providing the best cost-optimized Ethernet
solution for different networking applications:
> ISA-ES1 3-port version, offering 2 x FE electrical plus

1 x FE optical ports on board, providing 155 Mb/s
backpanel capacity and featuring GFP, VCAT, LCAS,
VLAN/Q-in-Q with QoS support.

> ISA-ES1 8-port version, offering 8 x FE electrical ports

on board, with the same features as the 3-port version.

Through the integration of Ethernet-switching capability
on Alcatel 1642 EM Ethernet cards, not only point-to-
point, but also point-to-multipoint applications and shared-
bandwidth rings can be implemented. The resources
required to connect several customer and business sites
to provide Ethernet LAN interconnection services are
drastically reduced.

Network-infrastructures owner must manage and

transport new Ethernet-based revenue-generating value
added services (VAS) at the lowest cost per bit, especially
in the access network, where bandwidth is limited. The
shared-bandwidth ring allows sharing of bandwidth
between multiple users who are accessing the ring, using,
for example, only 1 x VC-3 on each link for Ethernet
traffic and leaving enough bandwidth for other revenue-
generating services.

The Alcatel 1642 EM’s Ethernet card gives service

providers and public/private companies an optimized
solution for providing Ethernet LAN interconnection
services with incremental investments, exploiting the
existing SDH infrastructure, thus avoiding the need to
deploy a new overlay infrastructure, ultimately reducing
both CAPEX and OPEX.

The Alcatel 1642 EM is based on 2 x STM-1/4 (155 to 
622 Mbit/s) line interfaces, up to 18 STM-1 equivalents
full non-blocking HO SDH matrix and 12 STM-1 equiva-
lents full non-blocking LO SDH matrix, clock reference
and equipment control functions, all concentrated in a 
1-slot wide compact card.

The equipment’s shelf is physically formed in four

parts: a middle-lower area where a main control board
holds an STM-1/4 ADM, the upper part with up to four
upper tributary boards and the left and right parts
hosting the fan and power-access board. 

2

A L C AT E L

1642 EM

1642 EM

1642 EM

1642 EM

1642 EM

1642 EM

1642 EM

1642 EM