ZyXEL Communications NXC8160 Manuel D’Utilisation
Chapter 5 Wireless LAN
NXC-8160 User’s Guide
60
5.5.4 WPA-PSK
Select WPA-PSK from the Security Mode list.
Transmission
Keys
The WEP keys are used to secure your data from eavesdropping by unauthorized
wireless users. Both the NXC-8160 and the wireless clients must use the same
WEP key for data transmission.
You can configure up to four keys, but only one key can be activated at any one
You can configure up to four keys, but only one key can be activated at any one
time. Select a WEP key to use for data encryption. The default key is key 1.
To set the WEP keys, select ASCII or HEX as the WEP key input method and enter
To set the WEP keys, select ASCII or HEX as the WEP key input method and enter
the WEP key in the field provided. Select ASCII option to enter ASCII characters as
the WEP keys. Select the HEX option to enter hexadecimal characters as the WEP
keys.
If you chose WEP64 in the Security Mode field, then enter 5 ASCII characters or
If you chose WEP64 in the Security Mode field, then enter 5 ASCII characters or
10 hexadecimal characters ("0-9", "A-F") for each key.
If you chose WEP128 in the Security Mode field, then enter 13 ASCII characters or
If you chose WEP128 in the Security Mode field, then enter 13 ASCII characters or
26 hexadecimal characters ("0-9", "A-F") for each key.
RADIUS
The NXC-8160 can use an external RADIUS server to authenticate users.
RADIUS Server
IP Address
Enter the IP address of the external authentication server in dotted decimal
notation.
RADIUS Server
Port
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs you to
You need not change this value unless your network administrator instructs you to
do so with additional information.
Share Secret
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the NXC-8160.
The key is not sent over the network. This key must be the same on the external
The key is not sent over the network. This key must be the same on the external
authentication server and NXC-8160.
Table 17 SSID & Security: Static WEP + IEEE 802.1x (LEAP) (continued)
LABEL
DESCRIPTION