ZyXEL Communications NXC8160 Manuel D’Utilisation
NXC-8160 User’s Guide
67
C
H A P T E R
7
Access Points Screen
Click Access Points to display the screen as shown. This screen allows you to view the status
of the access points (APs) connected to the NXC-8160. You can also use this screen to set the
NXC-8160 not to supply power to an AP.
of the access points (APs) connected to the NXC-8160. You can also use this screen to set the
NXC-8160 not to supply power to an AP.
Figure 26 Access Points
The following table describes the labels in this screen.
Table 22 Access Points
LABEL
DESCRIPTION
Active Access
Points
This field is grayed out and shows whether an access point connected to the WLAN
port is active (selected) or not (cleared). By default, an AP receives power from the
NXC-8160 and is activated automatically when it is connected to the NXC-8160.
The check boxes correspond to the WLAN ports on the front panel of the NXC-
The check boxes correspond to the WLAN ports on the front panel of the NXC-
8160.
Power-On APs
Select a check box to have the NXC-8160 supply power to the AP connected to this
port. Otherwise, clear the check box and the NXC-8160 stops supplying power to
the AP connected to this port after you click Apply.
Apply
Click Apply to save your customized settings.
Reset
Click Reset to begin configuring this screen afresh.