Western Telematic MPC-20VS20-1 Manuel D’Utilisation

Warnings and Cautions:

Installation Instructions

Secure Racking

If Secure Racked units are installed in a closed or multi-unit rack assembly, they may 
require further evaluation by Certification Agencies.  The following items must be 
considered.

1.  The ambient within the rack may be greater than room ambient.  Installation 

should be such that the amount of air flow required for safe operation is not 
compromised.  The maximum temperature for the equipment in this environment is 
55°C.  Consideration should be given to the maximum rated ambient.

2.  Installation should be such that a hazardous stability condition is not achieved due 

to uneven loading.

3.  Side vents are used to dissipate heat generated within the unit.  When mounting 

the unit in an equipment rack, make certain to allow adequate clearance for 
venting.

Input Supply

Check nameplate ratings to assure there is no overloading of supply circuits that could 
have an effect on overcurrent protection and supply wiring.

Grounding

Reliable earthing of this equipment must be maintained.  Particular attention should 
be given to supply connections when connecting to power strips, rather than direct 
connections to the branch circuit.

No Serviceable Parts Inside; Authorized Service Personnel Only

Do not attempt to repair or service this device yourself.  Internal components must be 
serviced by authorized personnel only.