Denon AVR-2112CI Manuel D’Utilisation

129

Cannot login to 
Pandora. (“Email 
address” or 
“Password” is 
displayed.)

• Login information is incorrect. Check if the “Email address” for 

Pandora has been properly entered. Re-enter the “Password”. 
(Password is not displayed.)
http://www.pandora.com/denon

GAirPlayH

The AirPlay icon 

 is not displayed 

in iTunes or on the 
iPhone/iPod touch/
iPad. 

• This unit and the computer or iPhone/iPod touch/iPad are not 

connected to the same network (LAN). Connect the computer or 
iPhone/iPod touch/iPad to the same network as this unit.

• iTunes or the iPhone/iPod touch/iPad do not have firmware that 

supports AirPlay installed. Update to the latest firmware.

No sound.

• The volume in iTunes or on the iPhone/iPod touch/iPad is set to 

the minimum setting. Adjust the volume to the optimum level.

• This unit is not selected in the screen that is displayed when 

iTunes or the iPhone/iPod touch/iPad is started. Start iTunes or 
switch on the iPhone/iPod touch/iPad, click the AirPlay icon 

 in 

the displayed screen, and select this unit.

–

GRemote Control UnitH

The set cannot be 
operated with the 
remote control unit.

• Batteries are worn out. Replace with new batteries.
• Operate the remote control unit within a distance of about 

 

 

23 ft/7 m from this unit and at an angle of within 30°.

• Remove any obstacle between this unit and the remote control 

unit.

• Insert the batteries in the proper direction, checking the 

q and 

w marks.

• The set’s remote control sensor is exposed to strong light (direct 

sunlight, inverter type fluorescent bulb light, etc.). Move the set 
to a place in which the remote control sensor will not be exposed 
to strong light.

• The ZONE SELECT setting is not correct. Press 

 to 

select the zone to operate.

• The operation mode does not match the settings of the device to 

operate. Check the operation mode.

Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.

If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.