TANDBERG D1392602 Manuel D’Utilisation

TANDBERG Video Portal

Data port Command Interface User Guide

    Configuration:
       PRI:41
   TemperatureCelcius: NA
   TemperatureFahrenheit: NA
*s/end

4.2.4. Debug Commands

Command: Desription:

Syslog

Enables a real-time log of Bonding, H.221 and H324m, ISDN, RTSP, IVider, and IVider Engine activity.

Note! H323 and SIP logging is presented using the following command:
tsh –a H323 (SIP).

Note! Logging via the serial port is limited by the speed of the serial port, which might result in loss of
logging data. Therefore, it is advised to use Telnet instead.

Syslog <Level> <Mask> <Volume>

    <level> = log level, 0-99, 0 turns off log

    <mask>   = bitmask (default=65535):
    Mask: With this Mask the logging of different components can be turned on. The
    mask has to be used as a bit mask.

               H324m:                 1   (0x0001)
               ISDN:                        4     (0x0004)
               RTSP:                     8    (0x0008)
               IVider:                     16    (0x0010)
               Engine:                    64    (0x0040)
               FileStreamer:    128     (0x0080)
               ContentStreamer: 256   (0x0100)
               Transcoder:            512   (0x0200)
               Mux:                 1024   (0x0400)
               Cuil:                   2048   (0x0800)

    <volume> = message volume mask (default=0):

               Medium:               1 (0x01)
               High:                       2   (0x02)
               Show timestamp:   4   (0x04)
               Show IP address:     8   (0x08)
               Show Process:       16   (0x10)
               Show Session ID: 32   (0x20)

For instance to view the logging of the H324m, Transcoder and IVider components, the mask value equals 1
+ 512 + 32 = 545

4.2.5. Special (Xcommand) Commands

Command: Description:

Boot

Reboots the system.

D1392602