Nortel Networks AN/DC Manuel D’Utilisation
Operating the AN/DC and ANH-8/DC
312410-A Rev 00
4-13
Protecting Memory Card Files
Nortel Networks ships each memory card with its read-write protect switch in the
unprotected position
unprotected position
. After successfully loading the configuration
file and saving your configuration, you may want to write-protect the memory
card for backup purposes.
card for backup purposes.
To change memory card protection:
1.
Remove the memory card as described in the previous section.
2.
Adjust the read-write protect switch, which is located on the edge
opposite the INSERT arrow of the memory card
opposite the INSERT arrow of the memory card
.
Figure 4-10.
Memory Card Read-Write Protect Switch
3.
Reinsert the memory card into the card receptacle.
Note:
You typically do not operate the router with a write-protected memory
card. We recommend making a copy of your configuration on another memory
card, write-protecting the card, and storing it in a safe place.
card, write-protecting the card, and storing it in a safe place.
Protected
Unprotected
Insert
6948