Tyan Computer B2094T15 Manuel D’Utilisation
15
http://www.TYAN.com
5. Align the four points of the heatsink socket and secure with four screws following a diagonal
sequence.
6. Place the air duct back into place and secure with three screws.
7. Replace the cabinet cover.
Installing System Memory
Your system has two 184-pin DIMM (Dual In-line Memory Module) sockets to support a
maximum of 2 GB. You must follow these requirements for the DIMM to be used with the
system:
maximum of 2 GB. You must follow these requirements for the DIMM to be used with the
system:
l
Unbuffered DDR- SDRAM (Double Data Rate Synchronous DRAM) with ECC
l
PC1600/PC2100-compliant
l
2.5 V
Follow this procedure to install a DIMM:
1. Open the cabinet cover (see previous section).
2. Locate the DIMM sockets.