Tyan Computer B2094T15 Manuel D’Utilisation
27
http://www.TYAN.com
For Windows
Press the
button seven times, and you will see the prompt: Shut down server?
Press the
button and when the power is off, the power indicator turns off.
3.7 Linux RedHat Installation Notes
Due to the compatibility limitation between Linux RedHat 7.3 (and up) and some types of HDD,
the following warning message may appear during Linux installation:
the following warning message may appear during Linux installation:
The kernel was unable to re-read the partition table on /dev/hd
*
Device or resource busy, this means Linux knows nothing about any modifications you made.
You should reboot your computer before doing anything with /dev/hd* (hd* refers to the
HDD’s method of connection, e.g. , the master device of IDE0 is /dev/had while the master
device of IDE1 is /dev/hdc).
You should reboot your computer before doing anything with /dev/hd* (hd* refers to the
HDD’s method of connection, e.g. , the master device of IDE0 is /dev/had while the master
device of IDE1 is /dev/hdc).
In this case, you can select the “Ignore” key until the warning message window is closed. T hen
you may encounter two different possibilities depending on whether the Linux partition on the
HDD was implemented the first time or not.
you may encounter two different possibilities depending on whether the Linux partition on the
HDD was implemented the first time or not.
l
First possibility:
When the HDD has RedHat 7.3 (and up) present in the Linux partition (and the current
installation is only for modifying, deleting, or adding a Linux partition), then the
installation program will continue with the rest of the process.
When the HDD has RedHat 7.3 (and up) present in the Linux partition (and the current
installation is only for modifying, deleting, or adding a Linux partition), then the
installation program will continue with the rest of the process.
l
Second possibility:
When the HDD does not have RedHat 7.3 (and up) present in the Linux partition (even if
there is any other type of partition existing, e.g., NTFS), the installation program may show
this message –
An error occurred trying to initializ e swap on device hdc3, this
problem is serious and the installation cannot continue, Press
Enter to reboot your system
When the HDD does not have RedHat 7.3 (and up) present in the Linux partition (even if
there is any other type of partition existing, e.g., NTFS), the installation program may show
this message –
An error occurred trying to initializ e swap on device hdc3, this
problem is serious and the installation cannot continue, Press
Enter to reboot your system
to suggest that you reboot your system. T hen you can re- install RedHat 7.3 (and up) to solve
this issue (you may encounter the warning message on the first possibility, just ignore it).
this issue (you may encounter the warning message on the first possibility, just ignore it).
NOTES:
l
The above possibilities may occur when you use a type of HDD which is not compatible
with Linux O/S. I f you use the latest version (e.g., Linux RedHat 9.0 or the new
Seagate Alpine series HDD), then the above possibilities may not occur.
Seagate Alpine series HDD), then the above possibilities may not occur.
l
The above possibilities will not affect system performance.