Avaya S8500 Manuel D’Utilisation

The functions of the front-panel LEDs are as follows:

on page 80 shows the Ethernet port LEDs on 

the back panel of the S8500B. Each port connector has two LEDs, one for transmission activity 
and one to indicate the transmission speed. The port LEDs on the S8500C are the same as on 
the S8500B.

1. CD-ROM drive activity LED
2. CD-ROM eject button
3. Diskette drive activity LED
4. Diskette eject button
5. System error LED
6. System locator LED

.

7. Hard disk drive activity LED

8. Power on LED 
9. Power control button

10. Reset button — 

Press to reset the media 

server and run the power-on self-test 
(POST).

11. USB connections for the compact flash drive.

Power on

When lit and not flashing, the media server is turned on. 
When flashing, the media server is turned off and still 
connected to the AC power source. When off, AC power is 
not present, or the power supply or the LED failed.

Hard disk drive

When on or blinking, indicates HDD activity.

Locator

Use this blue LED to locate the media server if the media 
server is in a location with numerous other media servers.

System error

When on, indicates a system error.

CD-ROM drive

When on or blinking, indicates activity on the CD-ROM drive.

Floppy disk drive 
(S8500B only)

When on or blinking, indicates activity on the FDD drive.

h2ms85bf KLC 091704