Avaya S8500 Manuel D’Utilisation

Use a remote Secure Shell (SSH) or terminal emulation session to access the Communication 
Manager SAT command line prompt. 

Avaya field technicians and BusinessPartners must use a Services login such as craft or 
dadmin to perform initial configuration and upgrades. An Avaya field technician can use a 
unique password that is assigned to the customer system.

After the Avaya authentication file is installed, Avaya Communication Manager has a password 
for the craft login that is unique to the customer system and available when you are connected 
directly to the media server. Log in as craft and use this password to bypass the ASG challenge 
and response. Every other means of craft access requires an ASG challenge and response. 
The revised password is recorded by RFA and is obtained from ASG Conversant at 
1-800-248-1234 or 1-720-444-5557.

Using SAT with SSH:

See 

Using SAT with Terminal 
Emulation

To use a command line interface in a terminal emulation window, 
open your terminal emulation application. Configure the terminal 
emulation program port settings as follows:

●

Speed: 115200 baud or 9600 baud if you use a serial 
modem connection

●

No parity

●

8 data bits

●

1 stop bit

●

No flow control

NOTE: Avaya Native Configuration Manager, Avaya Terminal 
Emulation, and HyperTerminal are the only terminal emulation 
programs that Avaya supports.

Use either the IP address or the DNS host name to establish a 
network connection to the media server. Use port 5023 for this 
connection. When prompted, log in.