Compaq 1825 Manuel D’Utilisation

2. Remove the four screws as shown in the following 

illustration.

Ä

CAUTION: Ensure that the bottom of the monitor base is positioned 

over a table or desktop before removing the base from the monitor.

3. Remove the monitor base from the monitor.

1. Remove the monitor base. Refer to “Removing the Monitor 

Base” steps in the previous section.

When the base is removed, four threaded mounting holes are 
exposed on the monitor panel to be used for mounting purposes. 
These mounting holes are spaced 100 mm apart and are 
compliant with the Video Electronics Standards Association 
(VESA) standard for mounting flat panel displays.

Sarah User Guide.book Page 8 Tuesday, September 3, 2002 8:33 AM