Samsung SWL-2100N Manuel D’Utilisation
13
3. MagicLAN Installation For
Windows 98/ME/NT4.0/2000/XP/CE
We will explain the installation method for
SWL-2100N(PC Card)
.
3.1 Installation Overview
Here are some steps you will perform in establishing your wireless network connection:
1. Install the Access Point at first. AP is needed in case of Infrastructure network
mode.
2. You should install the Wireless LAN Card
(SWL-2100N).
3. Install the software using the Installation CD.
4. Install the network protocol(s) required to communicate on your network. Most
4. Install the network protocol(s) required to communicate on your network. Most
likely you will need the TCP/IP protocol.
3.2 Installation Procedure of Windows 98
Please follow the following steps one by one to install the
PC card
successfully.
< Method 1 - Inserting card first >
1. Insert the
PC Card
into the
PCMCIA slot
of your computer.
2. Add New Hardware Wizard appeared and the system looks for “
SAMSUNG-
11Mbps WLAN Card
”. Press NEXT button and check if Search for the best
driver for your device(recommended) is slected and then press NEXT button .
Insert the MagicLAN Installation CD into the CD-ROM drive.
Insert the MagicLAN Installation CD into the CD-ROM drive.
3. Mark the Specify a location tap and type “E:\Drivers” right below in this
tap(Where E is the CD-drive of your PC).