Cognitive Solutions LXG-UG00000 Manuel D’Utilisation

Serial Connection Parameters

• Baud Rate

• XON/XOFF

• Buffer Size

• Buffer Overflow

Connecting Via Ethernet

1. Select the Use Network Connection radio dial

2. Input the printer’s IP Address if static IP Address is to be used, otherwise, with

DHCP enabled, your server will assign an IP Address to the printer

3. Input the printer’s RTEL port number

Ethernet Connection Parameters

• IP Address

• Net Mask

• Gateway

• DHCP

• LPD

• RTEL

• RTEL Port

• Ethernet Text Buffer

Connecting Via Parallel

1. Select the Use Parallel Connection radio dial

2. Select the Parallel (LPT) Port to which the printer is connected

3. Click Connect

Printer Settings

Print Speed

The Print Speed value sets the printing speed of the printer.

• Low = 2 inches per second

• Normal = 2 inches per second

• high = 3 inches per second

hELPFUL TIP: PRINT

A SELF TEST TO

DETERMINE PRINTER’S

CURRENT SETTINGS.

A SELF TEST CAN

bE PERFORMED by

hOLDING ThE FEED

bUTTON WhILE

TURNING PRINTER

POWER ON. CONTINUE

TO hOLD ThE FEED

bUTTON UNTIL SELF

TEST PRINTS.

NOTE: USING ThE

PARALLEL PORT

CONNECTION WITh

ADMINISTRATOR

PROvIDES LIMITED

FUNCTIONALITy DUE

TO ThE PRINTER’S

UNI-DIRECTIONAL

COMMUNICATIONS ON

ThIS PORT. SETTINGS

CAN bE SENT vIA

ADMINISTRATOR, bUT

ThEy WILL NOT FILL IN

ON SCREEN.