Sanyo POA-PN03C Manuel D’Utilisation

The Network PIN code can be set to restrict access to the setting page of the projector 
using the web browser. 
✐

Select network menu and then select "Network PIN code" sub menu. Press SELECT but-
ton twice to display the Network PIN code entry pallet.

*  The number on the pallet is the current Network PIN code.

To enter the Network PIN code, use point buttons 
(▲,▼,7,8) on the  projector or the remote con-
trol.

After entering a 4-digit number, select "SET" by 
using point buttons (7,8) and then press SELECT 
button. 

✐

  The screen 10-key pallet can be used for entering the Network PIN code. See item "How to enter 

the numbers with the screen 10-key pallet" (+. 23) 

✐

  It is recommended to set up the Network PIN code when you connect the projector to the net-

work. This setting is carried out through the projector’s menu and also it can be set through the 

network using the web browser. For further information, refer to item "Initial setting/Network PIN 

code setting" (+ p.35).

✐

  Valid characters for the Network PIN code are only numbers 0 to 9. The number "0000" means no 

Network PIN code is set.

✐

  This Network PIN code is not to restrict the use of the projector. This Network PIN code is to set 

the security against the use of the projector through the network.

Network PIN Code

The red frame moves  

sequentially left or right 

with  7 8 button.

The number up or down 

with d e button.