Canon 700 Series Manuel D’Utilisation
Setting Up Coded Speed Dialing
2-22
2
Using Speed Dialing
24
If you want to turn ECM (Error Correction Mode) ‘ON’ or ‘OFF’,
press [
press [
▼
] or [
▲
] until <6.ECM> appears
➞ press [Set].
NOTE
ECM (Error Correction Mode) reduces system and line errors during sending or
receiving with another fax machine that supports ECM. If the other fax machine
does not support ECM, this setting is ignored. If the transmission speed appears to
be extremely slow, you may be able to speed up the transmission time by turning
the ECM ‘OFF’.
receiving with another fax machine that supports ECM. If the other fax machine
does not support ECM, this setting is ignored. If the transmission speed appears to
be extremely slow, you may be able to speed up the transmission time by turning
the ECM ‘OFF’.
25
Press [
▼
] or [
▲
] to select ‘ON’ or ‘OFF’
➞ press [Set].
26
If you want to select a telephone line for outgoing fax
transmissions, press [
transmissions, press [
▼
] or [
▲
] until <7.TX LINE SELECTION>
appears
➞ press [Set].
If you do not want to perform this setting, proceed to step 28.
NOTE
This setting becomes available only when the optional Dual-Line Upgrade Kit is
installed on your machine.
installed on your machine.
27
Press [
▼
] or [
▲
] to select <AUTO> or <FIXED>
➞ press [Set].
<AUTO>: The machine uses the available telephone line for outgoing fax
transmissions.
<FIXED>: The machine uses only the telephone line you select here for
outgoing fax transmissions.
●
If you select ‘AUTO’:
❏ Proceed to step 28.
➞
➞
➞
Set
Set
Set
Set