Panasonic UF-4100 Manuel D’Utilisation
Troubleshooting
97
Pr
o
b
le
m
So
lv
in
g
Communication
No dial tone
1. Check the connection of the telephone line.
2. Check the telephone line.
2. Check the telephone line.
No auto answer
1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 13 (AUTO JRNL PRINT) is set to
2. Check the Reception mode setting.
3. If the Fax Parameter No. 13 (AUTO JRNL PRINT) is set to
"Valid" (default setting) and the machine is printing the
received document(s) from memory, which also happens to
be the 32nd transaction, the machine will not auto answer
until the Transaction Journal completes printing.
received document(s) from memory, which also happens to
be the 32nd transaction, the machine will not auto answer
until the Transaction Journal completes printing.
Cannot transmit or
receive
receive
An information code will be shown on the display. Refer to the
information code table to find out the trouble.
information code table to find out the trouble.
No Unit Operation
No unit operation
To reset the machine, unplug the Power Cord for a few
seconds then plug it in again.
seconds then plug it in again.
Mode
Symptom
Cause / Action
page