Ricoh 340 Manuel D’Utilisation
SORT/STACK/STAPLE
49
2
When setting an original on the
exposure glass or in the
document feeder
exposure glass or in the
document feeder
Reference
See
⇒
P.33 “SADF mode”
A Set the original, then press the
{
Start
} key.
Note
❒ Start with the first page to be
copied.
B Set the next original, then
press the
{
Start
} key.
Note
❒ Set the original in the same
direction as the first one.
C After all originals are scanned,
press the
{
#
} key.
The copies are delivered to the
tray.
tray.
Staple
The optional finisher is required to use
this function.
this function.
Each copy set can be stapled together.
Limitation
❒ You cannot use the following pa-
per in this function:
• Post cards
• Translucent paper
• OHP transparencies
• Adhesive labels
• Curled paper
• Low stiffness paper
• Post cards
• Translucent paper
• OHP transparencies
• Adhesive labels
• Curled paper
• Low stiffness paper
Note
❒ For this mode, the following limi-
tation apply. When the number of
copies exceeds the tray capacity,
copying stops. In this case, remove
the copies from the shift tray and
then resume copying.
copies exceeds the tray capacity,
copying stops. In this case, remove
the copies from the shift tray and
then resume copying.