Marantz SR7300OSE Manuel D’Utilisation

Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country’s standard is 9 kHz step,
Press 

button on the remote more than 6 seconds. Scan step

will change.

• Preset memory for the tuner will clear by changing this setup.

To select tuner and desired band (FM or AM), press the 

button on the front panel.

button on the front panel to display the frequency.

Press the 

 or 

button on the front panel for more than

1 second to start the Auto tuning function.

Automatic searching begins then stops when a station is tuned in.

To select tuner and desired band (FM or AM), press 

button twice within in two seconds on the remote.

Press 

5

5

5

5

5

 or 

6

6

6

6

6

more than 1 second on the remote.

Automatic searching begins then stops when a station is tuned in.

If tuning does not stop at the desired station, use to the “Manual
tuning” operation.

To select tuner and desired band (FM or AM), press the 

button on the front panel

Press the 

 button on front panel, to

appears frequency on the display.

Press the 

 or 

button.

To select tuner and desired band (FM or AM), press 

button twice within in two seconds on the remote.

Press 

5

5

5

5

5

 or 

6

6

6

6

6 

on the remote

to tune in the desired station.

To select tuner and desired band (FM or AM), press 

button twice within in two seconds on the remote.

Press the 

on the remote, display will show “

”.

Input your desired station’s frequency with ten keypad on the
remote.

The desired station will automatically be tuned.

When in the auto stereo mode, 

 indicator keeps to light on the

display.
The “

” indicator lights on when a stereo broadcast is tuned in.

At open frequencies, the noise is muted and the “

” and “

”

indicators turn off.
If the signal is weak, it may be difficult to tune into the station in stereo.
In such a case, press the 

 button on the front panel or press

button on the remote.

“

” indicators turn off ,FM stereo broadcasts are received in

monaural and the “

” indicator turns off.

To return to auto stereo mode, press the 

 button or press 

button on the remote again. 

 indicator lights on the display.

With this unit you can preset up to 50 FM/AM stations in any order.
For each station, you can memorize the frequency and reception
mode if desired.

This function automatically scans the FM and AM band and enters all
stations with proper signal strength into the memory.

To select FM , press the 

button on the front panel.

While pressing the 

button, press the 

 

button

to up.
“

” will appear on the display, and scanning starts

from lowest frequency.