FieldServer FS-8704-16 Manuel D’Utilisation

 
 

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA  Web:www.fieldserver.com 

Tel: (408) 262-2299   Fax: (408) 262-9042   Toll_Free: 888-509-1970   email: support@fieldserver.com 

FINS_UDP#12: Err. Mrc-Src  
Reqd/Ext <%2X-%2X/%2X-%2X> 

Response from PLC not for current request.  

FINS_UDP#21: Err. Message from 
PLC is Not a Response> 
MRC <%2X> SRC <%2x> MD 
<%s> 

Message from PLC for shown request is not a 
response. 

FINS_UDP#22: Err. Unknown 
Device with Parameters... 
Reqd/Ext dna <%d/%d> node 
<%d/%d> unit <%d/%d> 

Response from PLC ignored because 
mismatching for any shown parameters. 

FINS_UDP#23: Err. Message 
Sequence Not Matched.Reqd/Ext 
<%d/%d> 
MRC <%2X> SRC <%2X> MD 
<%s> 

Response from PLC ignored because of 
mismatching request-response sequence Id. 

FINS_UDP#24: FYI. Bad 
Start<%2X> 

The message was ignored because the first 
byte was bad. 

FINS_UDP#31 : FYI Net_Number 
set to 1 Node <%s> 

The Net_Number parameter is 0 or not 
specified.  The Driver will automatically 
change it to the default of 1 

FINS_UDP#32 : FYI Udp Port is 
<%d> 

Information about UDP Port number in use. 

FINS_UDP#41: FYI. Write-thru not 
Possible On MD <%s> 

Upstream device tried Write-thru operation on 
other than IO memory area. 

FINS_UDP:#51 FYI. You could 
have used an Array called <%s> 
to expose diagnostic info. Read 
Manual. 

Define an array to expose stats if required. 
See Appendix B.1