Hoover cleaner Manuel D’Utilisation

Line up bottom plate with front edge of
cleaner and rotate it into position.

Reposition the 2 Phillips head screws.
Tighten screws securely.

When brush roll brushes are worn, it
should be replaced.

To check condition of brushes, move
edge of a card across bottom plate
while turning brush roll.  To maintain
cleaning effectiveness, replace brush
roll if brushes do not touch card.

When purchasing a new brush roll, as
for Hoover 

1. Remove bottom plate, belt and brush

roll following directions for Fig. 3-8
and 3-9.

2. Discard old brush roll

3. Continue following the directions for

“Belt replacement”  starting  with 
Fig. 3-11 to reposition belt, new
brush roll and bottom plate.

The motor is equipped with bearings
which contain sufficient lubrication for
the life of the motor. The addition of
lubricant could cause damage.  

The agitator is equipped with two ball
bearings that should be lubricated 
periodically by a Hoover Factory 
Service Center or an Authorized Hoover 
Warranty Service Dealer (Depot).

To obtain approved HOOVER service
and genuine HOOVER parts, locate 
the nearest

by:

• checking the Yellow Pages 

under “Vacuum Cleaners - 
Household” OR -

• checking the list of Factory 

Service Centers provided 
with this cleaner OR -

• checking the Service section of 

The Hoover Company on-line at 

OR -

• calling 1-800-944-9200 for an 

automated referral of authorized
service outlet locations 
(U.S. only).

send your cleaner to The Hoover

Company in North Canton for service,
this will only result in delay.

If further assistance is needed, contact
The Hoover Company Consumer
Response Center, North Canton, 
Ohio 44720, Phone:  330-499-9499.

contact Hoover Canada,

Burlington, Ontario L7R 4A8, 
Phone:  1-800-263-6376.
Always identify your cleaner by the

model number when 

requesting information or ordering parts.
(The model number appears on the 
bottom of the cleaner.)

This Hoover Cleaning Performance Sys-
tem is for comparing the relative pro-
gressive performance of 

and not for comparison

with any other brands. The majority of
this rating is based upon the ASTM
International Carpet Cleaning Effective-
ness Testing (ASTM Test F608). Other
performance factors include Hose
Power (ASTM Test F558), Surface Litter
Cleaning, Hard Floor Cleaning, Edge
Cleaning, Cleaning Width, and Air Filtra-
tion.