Phantom Tech QC03-0903R Manuel D’Utilisation

11

Cutting the

 

Top and Bottom

 

Rails

NOTE:  Top Rail     is clearly labeled with CUT and NO CUT zones.

1.  Remove the End Caps from both sides of the Top Rail     .

2.  Using the "Length to be Cut" dimension for Top Rail      calculated on 

Page 10, carefully measure and mark the rail on all sides to ensure an 
even cut.

3.  Cut straight through Top Rail      .

Cutting the Bottom Rail 

 

NOTE: Low and High Bottom Rails     and      are clearly labeled with CUT 
and NO CUT zones.

1.  Select the Bottom Rail chosen on Page 9.

2.  Using the same "Length to be Cut" 

dimension for Top Rail     , carefully 
measure and mark the Bottom Rail 
on all sides to ensure an even cut.

3.  Cut straight through Bottom Rail      or      .

NOTE: After cutting any part of the screen, 
use a file to remove any burrs from the 
surfaces.

  

cut this end.

Cut this end

Door opening

  

Cut this portion

Cut this portion

  

2

2

2

2

2

3

4

3

4

3

4

2