Emerson CF715AB00 Manuel D’Utilisation

Tools Needed for Assembly

One Phillips head screwdriver

One stepladder

One 1/4” blade screwdriver

One wire stripper

One 5/16” open end wrench, or pliers
Three wire connectors (supplied)

MATERIALS

Wiring outlet box and box connectors must be of type
required by the local code. The minimum wire would
be a 3-conductor (2-wire with ground) of the following
size:

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each step is com-
pleted, place a check mark in the box. This will insure that all steps have been completed
and will be helpful in finding your place should you be interrupted.

1. Check to see that you have received the following parts:
NOTE: If you are uncertain of part description,
refer to exploded view illustration.

a. Fan motor assembly
b. One switch housing assembly
c. Five fan blades
d. One ceiling cover
e. Five blade flanges
f. One hanger ball/downrod assembly
g. One hanger bracket
h. One loose parts bag containing:

1. Sixteen 3/16-24 x 5/16” slotted Phillips

head blade screws

2. Sixteen blade washers
3. Eleven 1/4-20 x 1/2” Phillips oval head

flange screws

4. One wood pendant
5. One coupling
6. Three wire connectors
7. Two threaded studs
8. Two lockwashers
9. Two knurled knobs

10. One clevis pin
11. One hairpin clip

NOTE: Place the parts from the loose parts bags
in a small container to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.

2. Remove the fan motor assembly from the

protective plastic bag. Place the fan assembly into
the upper foam pad with the top of the motor
facing up.

The upper foam pad serves as a holder for the fan
during the first stages of assembly.

CEILING
COVER

LOOSE PARTS
BAG

FAN MOTOR
ASSEMBLY

HANGER BALL/
DOWNROD
ASSEMBLY

HANGER
BRACKET

FAN
BLADES

SWITCH HOUSING
ASSEMBLY

BLADE FLANGES

Before assembly your ceiling fan, refer to section on
proper method of wiring your fan (page 6). If you feel
you do not have enough wiring knowledge or experi-
ence, have your fan installed by a licensed electrician.

WARNING

Do not install or use fan if any part is damaged or
missing. Call Toll-Free:

1-800-654-3545

This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Company. Substitution of parts or
accessories not designated for use with this product
by Emerson could result in personal injury or
property damage.

WARNING

This Manual Is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Installed Wire Length

Wire Size A.W.G.

Up to 50 ft.

50-100 ft.