Raymarine E03017 Fascicule
CAM 50
User Guide
Technical Support
Technical Specification
Maintenance
If you do not have a breaker in the power
circuit, an in-line 0.5 A quick blow fuse should
be fitted to the positive (red) lead of the cable.
circuit, an in-line 0.5 A quick blow fuse should
be fitted to the positive (red) lead of the cable.
Maintenance and
Troubleshooting
Your Raymarine CAM 100 does not contain
user-serviceable parts. They should be
serviced only by authorized Raymarine service
technicians at a Raymarine factory facility.
user-serviceable parts. They should be
serviced only by authorized Raymarine service
technicians at a Raymarine factory facility.
Routine Maintenance
Routine maintenance should be carried out on
a regular basis:
a regular basis:
•
Examine all cables for signs of damage
such as chafing, cuts or nicks.
such as chafing, cuts or nicks.
•
Check that all cables are securely
connected.
connected.
•
Spray the camera and lens with fresh water
and wipe with a soft lint-free cloth to
remove debris or salt deposits.
and wipe with a soft lint-free cloth to
remove debris or salt deposits.
Troubleshooting
Waste Electrical and Electronic
Equipment (WEEE) Directive
Raymarine fully complies with the
WEEE directive and as part of its envi-
ronmental policy asks you to be aware
of how you should dispose of this
WEEE directive and as part of its envi-
ronmental policy asks you to be aware
of how you should dispose of this
product properly. The crossed out wheelie bin,
illustrated on the left, and found on our prod-
ucts signifies that this product should not be
disposed of in general waste or landfill. Please
contact your local dealer, national distributor or
Raymarine Technical Services for information
on product disposal.
illustrated on the left, and found on our prod-
ucts signifies that this product should not be
disposed of in general waste or landfill. Please
contact your local dealer, national distributor or
Raymarine Technical Services for information
on product disposal.
Restriction of the use of certain
Hazardous Substances
This product uses components
that comply with the requirements
of the Restriction of the use of
certain Hazardous Substances
that comply with the requirements
of the Restriction of the use of
certain Hazardous Substances
(RoHS) Directive 2002/95/EC.
Warranty
To register your new Raymarine product,
please take a few minutes to visit our website
please take a few minutes to visit our website
www.raymarine.com.
It is important that
you register to receive full warranty benefits.
Technical support
Complete product information and interactive
help is available at:
help is available at:
www.raymarine.com
North and South America
Raymarine Technical Support
+1-800-539-5539 or, +1-603-881-5200
Product Repair and Service
Raymarine Product Repair Center
21Manchester Street, Merrimack,NH0354-
4801
4801
Europe, Middle East, Africa and
Australasia
Raymarine Technical Support
+44 (0) 23 9271 4713
Product Repair and Service
Raymarine plc, Anchorage Park, Portsmouth,
PO3 5TD, England.
PO3 5TD, England.
Problem
Solution
Camera does not
function
function
1. Make sure that the cable is
sound and
sound and
that all connec-
tions are tight and free
from
corrosion.
2. Check system fuses.
3. Check that the display is set up
2. Check system fuses.
3. Check that the display is set up
correctly to receive the
images.
Refer to the relevant display
handbook for full details.
handbook for full details.
Red +12 V
Black - 0 V
Black - 0 V
Video connector
D8537_1
Format
NTSC 512 x 492 pixels
PAL 500x 582 pixels
PAL 500x 582 pixels
Imager
1/3 Sony DSP Color CCD
Horizontal resolution 380TVL
Scanning system
NTSC 525 lines 2:1 interlaced
PAL 625 lines
PAL 625 lines
Video output
Composite 75 Ohms
Shutter speed
NTSC 1/60 - 1/100.000sec
PAL - 1/50 - 1/100.000 sec
PAL - 1/50 - 1/100.000 sec
Minimum illumina-
tion
tion
0.3 Lux at F2
Waterproof
IP63
Power connection
12 V tinned leads
Video connections
Female BNC
Operating tempera-
tures
tures
-10
o
C to +50
o
C (-14
o
F to 122
o
F)
Power consumption
80 mA with regulated power
input.
input.
Lens
3.6 mm
Best focus - 1.5 m
Viewable distance - 3.5 m
Best focus - 1.5 m
Viewable distance - 3.5 m
Document No:81294_1 Date: December 2006
RoHS
COMPLIANT
81294_1.fm Page 2 Friday, September 15, 2006 9:29 AM