Panasonic WJ-MPU955A Manuel D’Utilisation

54

■ Default Status (LCD Display

q Monitor number

The number of connected monitor is displayed.

w Unit number/Status

The number of connected site will be displayed.

e Camera number

The number of selected camera is displayed.

r Input number/Recorder number/Status

The numeric input, selected recorder number, or status
is displayed.

■ Blinking

In this document, grayed (greyed) areas on the LCD illus-
trations mean blinking.

■ Messages Displayed on the

The following are examples of LCD display after login.

Note: Some parts of LCD displays, described on this docu-

ment, may differ from the actual status.

● Invalid

This message is displayed in the following circumstances.

• When you have entered a wrong user ID or password,

etc. 

• When you have entered a camera number or monitor

number, etc. that is not existing.

● Busy

• When a selected monitor is controlled by a higher-level

user, "

∗" blinks on the LCD. (You cannot control the

monitor.)

• When a selected camera is controlled by a higher-level

user, "

∗" blinks on the LCD.  (You cannot control the

camera.)

• To cancel the Busy status, select another monitor, cam-

era, or wait until "

∗" goes out.

● Prohibit (Prohibited)

• When you have tried an operation not authorized by the

system unit, "Prohibited" is displayed on the LCD.

• When you have forgotten to select a monitor before

selecting a camera, "Prohibited" is displayed on the
LCD.

• After a few seconds, the LCD display will return to the

default status.

 MON Invalid    CAM

0001 Unit:01   00001

 MON Prohibit   CAM

∗

0001 Unit:01   00001

"Busy" status is activated for a camera.

∗ MON Prohibit   CAM
0001 Unit:01   00001

"Busy" status is activated for a monitor.

 MON Prohibit   CAM

0001 Unit:01   00001

∗ MON Prohibit   CAM
0001 Unit:01   00001

Blinking

 MON            CAM

0032 Unit:01  >00512