HP (Hewlett-Packard) 6221 Manuel D’Utilisation

You can use your dock to transfer images to a computer and to print them directly to a
printer.

The way you transfer images may vary somewhat depending on the following factors.
●

Windows or Mac computer

●

Version of the operating system

●

Whether or not the HP Photosmart Software is installed

If you are using Windows 98 or Me, you must install the HP

Photosmart Software to transfer images.

●

Whether the camera's 

 is set to 

 or 

. Refer to your camera electronic User Guide for more information.

1.

Connect the dock to the computer using the USB cable.

2.

Place the camera in the dock and turn it on.

3.

Press either the 

 on the dock or the 

 button on the remote.

4.

Follow the directions on your computer screen. Refer to the on-screen help for
more information.

1.

Connect the dock to the printer's PictBridge 

 port (usually on the front of the

printer).

2.

Set the camera's 

 setting to 

 (see the camera

electronic User Guide).

3.

Insert the camera into the camera dock and turn on the camera.
The 

 menu displays on the camera. If you already selected images to

print in the camera, the number of images selected will be shown in the 

 menu. Otherwise, 

 will be displayed.

4.

If all the settings in the 

 menu look correct, press the 

button on the camera to begin printing. Or, you can change settings in the 

 menu using the arrow keys on the camera, then press 

 to begin

printing.

5.

When the printing completes, you can leave the camera in the dock to recharge
the camera battery.