Canon PowerShot A200 Manuel D’Utilisation

Image too large

: You attempted to replay an image whose resolution exceeded 3200 x 2400 pixels or

whose file size was too large.

Incompatible JPEG format

: You attempted to replay an incompatible JPEG file.

Corrupted data

: You attempted to replay an image with corrupted data.

RAW

: You attempted to replay an image recorded in the RAW format.

Unidentified image

: You attempted to replay an image file recorded in a unrecognized format (file recorded

by a different camera in a proprietary format, etc.).

Cannot magnify!

: The image you attempted to magnify was recorded by another camera, or recorded in a

format that cannot be magnified, or edited on a computer.

Cannot rotate!

: The image you attempted to rotate was recorded by another camera, or recorded in a

format that cannot be rotated, or edited on a computer.

Protected!

: You attempted to erase a protected image.

Too many marks!

: Too many images have been marked for printing. No more images can be marked.

Unselectable image

: You attempted to set the print settings for a non-JPEG file.

Exx

: Camera malfunctioned. Turn off the power and turn on again, then re-shoot or replay. If

the same message recurs frequently, the camera may be damaged. Note down the error

number [xx] and take the camera to a Customer Support Help Desk. If this message

appears immediately after you have taken a shot, the camera may not have shot the

image. Switch to the Replay mode and check whether the image was actually recorded.

● List of Menu Options and Messages ●

The following table explains each of the messages that may appear on the LCD monitor.

Busy...

: The camera is recording image data to the CF card. The Replay mode is running.

No CF card

: You attempted to shoot or replay with no CF card installed.

Cannot record!

: You attempted to shoot with no CF card installed.

CF card error!

: There is something wrong with the CF card.

CF card full

: The CF card is too full to store images or accept new print settings.

Naming error!

: The camera cannot generate a file name for the image you have shot because the card

already contains a folder having the same name as the file to be created, or the file
number has already reached the maximum possible value. Display the Rec. menu and
set [File Number Reset] to [On]. Save all images you wish to keep into your computer,
and reformat the CF card. Please note that formatting will erase all data in the card.

Change the batteries

: The batteries are dead, and the camera can no longer function. Replace both batteries

at the same time with new AA-size alkaline batteries (p. 19) or fully recharged batteries.

No image

: No images recorded on CF card.

● List of Menu Options and Messages ●