Panasonic KX-HCM280 Manuel D’Utilisation
Operating Instructions
[For assistance, please call: 1-800-272-7033] 99
4.1.2
Mounting on the Ceiling
Mount Network Camera at an even place where vibrations etc. are few. Set the Tilt
range to [On the ceiling] on Camera Setup window on page 84. Two ways of
wiring can be considered; wiring through a hole made in the ceiling or wiring
without making a hole for a cable in the ceiling. Select either one of the two.
range to [On the ceiling] on Camera Setup window on page 84. Two ways of
wiring can be considered; wiring through a hole made in the ceiling or wiring
without making a hole for a cable in the ceiling. Select either one of the two.
Wiring through a hole made in the ceiling
1.
Fix the Ceiling Plate B on the ceiling with Screws B.
•
Fix the Ceiling Plate B more than 100 mm (4 inches) off the wall or other
obstacles from its center.
obstacles from its center.
•
Make sure Network Camera is firmly mounted on a beam of wood etc.
When there is no beam, apply a board on the other side of the ceiling to
make sure Network Camera does not drop.
When there is no beam, apply a board on the other side of the ceiling to
make sure Network Camera does not drop.
Screws B (4 pcs.)
Keep more than 100 mm
(4 inches) off the wall or
other obstacles.
(4 inches) off the wall or
other obstacles.
Network Camera
Direction
Direction
100 mm
(4 inches)
(4 inches)